Jano Beater Fabrication

Here’s a quick setup for routing the reed-retaining grooves on the Jano beater.  Rather than going through  the trouble of mounting my router in its table for this simple and one-time operation I screwed the sliding spacer to a 2×2 and clamped this in a Workmate table.  It produced a perfect groove of proper depth…

DSC00025

Here’s the finished beater for the Jano, which I had to fabricate.  Now it awaits the arrival of a 12 dent reed, 4 1/2″ high x 20 1/2″ long…

DSC00027

DSC00028

DSC00030

Advertisements